JEMOE FLOW

Home / Products / BALL VALVE

BALL VALVE

API 6D / API 608 / ISO 17292 / DIN 3202 / EN 12570

BALL VALVE — API 6D / API 608 / ISO 17292 / DIN 3202 / EN 12570
BALL VALVE

BALL VALVEs for quarter-turn isolation with tight shut-off, in oil & gas gathering, petrochemical, LNG and water injection service.

Floating and trunnion-mounted designs, fire-safe as standard, with ISO 5210 mounting pads for actuators.

Types & configurations
  • Floating ball: cast one / two / three-piece and forged two / three-piece; reduced or full bore; fire-safe to API 607 / ISO 10497
  • Trunnion mounted: forged side-entry and top-entry; double block & bleed; cavity relief seat design
  • Metal-seated option for high temperature, abrasive or dry service; NACE MR0175 for sour service
Size & pressure range
Pressure class / typeSize rangeEnd connections
Floating CL150–2500NPS 1/2–12 (DN15–300)RF, RTJ, BW, THD
Floating forged CL800NPS 1/4–2RF, RTJ, SW, THD, BW
Trunnion CL150–2500NPS 2–60 (DN50–1500)RF, RTJ, BW, hub
DIN / EN — PN rated
DIN Floating PN16/25/40DN15–300 (½"–12")Flanged, THD, SW
DIN PN63/100DN15–150 (½"–6")Flanged, BW

Full scope, special-class items and non-standard sizes are quoted against specific enquiries.

Specification
Pressure class
CLASS150 – CLASS2500 / PN16 – PN100
Material options
WCB, LCB, CF8, CF8M, duplex, A105N, LF2
End connection
Flanged (RF, RTJ), butt weld, socket weld, threaded, hub
Typical application
Oil & gas gathering and metering, petrochemical and LNG service, low-temperature duty with LF2 bodies, water injection and abrasive slurries.
Notes

Fire-safe and anti-static design as standard; ISO 5210 direct mounting pad for actuators; cavity relief seats on trunnion type.

Materials — trim — service
BODY
A216 WCB / A352 LCB / A351 CF8, CF8M / duplex / A105N, A350 LF2 (forged)
SEAT
PTFE / RPTFE / PEEK / Nylon; metal-seated laminated option
TRIM
F6a (13Cr) / SS316 / Monel / Inconel
FAQ
Which standard governs your BALL VALVEs?

Pipeline valves to API 6D, general industrial valves to API 608 and ISO 17292, DIN / EN valves to EN 12570. Fire-safe qualification to API 607 / ISO 10497.

Floating or trunnion mounted?

Floating ball up to NPS 12 for lower pressure and smaller sizes; trunnion mounted for larger bore and higher pressure, where operating torque must stay manageable.

Is NACE compliance available?

Yes. NACE MR0175 / ISO 15156 trim and materials are available for sour service — state the H2S concentration and partial pressure when you inquire.