GLOBE VALVEs for throttling and frequent operation on steam, refining and instrumentation lines, where flow regulation matters as much as shut-off.
Available with bellows seal for zero fugitive emission, and Stellite-faced seating for erosive service.
Types & configurations- Cast steel, OS&Y, bolted bonnet; pressure-seal bonnet for high classes; Y-pattern for instrumentation and drain service
- Forged steel to API 602, reduced or full bore; piston-type disc on request
- Options: bellows seal, Stellite 6 facing on seat and disc for erosive service
| Pressure class / type | Size range | End connections |
|---|---|---|
| Cast steel CL150 | NPS 2–24 (DN50–600) | RF, RTJ, BW |
| Cast steel CL300 | NPS 2–20 (DN50–500) | RF, RTJ, BW |
| Cast steel CL600 | NPS 2–16 (DN50–400) | RF, RTJ, BW |
| Cast steel CL900 | NPS 2–16 (DN50–400) | RF, RTJ, BW |
| Cast steel CL1500 | NPS 2–12 (DN50–300) | RF, RTJ, BW |
| Cast steel CL2500 | NPS 2–12 (DN50–300) | RF, RTJ, BW |
| Forged steel CL800–2500 | NPS 1/4–2 | RF, RTJ, SW, THD, BW |
| DIN / EN — PN rated | ||
| DIN PN16/25/40 | DN15–400 (½"–16") | Flanged, BW |
| DIN PN63/100 | DN15–200 (½"–8") | Flanged, SW, BW |
Full scope, special-class items and non-standard sizes are quoted against specific enquiries.
- Pressure class
- CLASS150 – CLASS2500 / PN16 – PN100
- Material options
- WCB, LCB, WC6, WC9, CF8, CF8M, A105N, LF2
- End connection
- Flanged (RF, RTJ), butt weld, socket weld, threaded
- Typical application
- Throttling and isolation in refining, steam and power plant; instrumentation, drain and sampling lines; bypass service around control valves.
Size taper: the higher the pressure class, the smaller the maximum bore — CL1500/2500 stop at NPS 12. Larger sizes quoted against specific enquiries.
- BODY & BONNET
- A216 WCB / A352 LCB / A217 WC6, WC9 / A351 CF8, CF8M / A105N, A350 LF2 (forged)
- TRIM & SEAT
- 13Cr / SS316 / Stellite No. 6 overlay; graphite packing as standard
Which standard governs your GLOBE VALVEs?
Cast steel valves to API 623 and ASME B16.34, forged valves to API 602, DIN / EN valves to EN 13709 and DIN 3202.
Do you offer bellows-seal construction?
Yes. Bellows-seal GLOBE VALVEs are available for toxic, flammable or high-value media where fugitive emission must be controlled.
Why does the maximum size drop at higher classes?
Body wall and bonnet sealing requirements grow with pressure class, so the maximum bore tapers — CLASS1500 and CLASS2500 stop at NPS 12.

