JEMOE FLOW

Home / Products / CHECK VALVE

CHECK VALVE

API 594 / API 6D / BS 1868 / EN 12334 / DIN 3202

CHECK VALVE — API 594 / API 6D / BS 1868 / EN 12334 / DIN 3202
CHECK VALVE

CHECK VALVEs for backflow prevention on pump discharge, compressor outlets and pipeline service, where a failed check means an unprotected system.

Swing, dual-plate and piston types cover the full range from large transmission mains to small-bore high-pressure lines.

Types & configurations
  • Swing type with bolted or pressure-seal cover, cap or lever; for horizontal and vertical-up flow
  • Dual-plate wafer, lug or flanged type, spring loaded, for compact installations
  • Piston / lift type for high-pressure small bore; forged steel to API 602
Size & pressure range
Pressure class / typeSize rangeEnd connections
Swing CL150NPS 2–60 (DN50–1500)RF, RTJ, BW
Swing CL300NPS 2–56 (DN50–1400)RF, RTJ, BW
Swing CL600NPS 2–60 (DN50–1500)RF, RTJ, BW
Swing CL900NPS 2–36 (DN50–900)RF, RTJ, BW
Swing CL1500NPS 2–36 (DN50–900)RF, RTJ, BW
Swing CL2500NPS 2–24 (DN50–600)RF, RTJ, BW
Dual plate CL150–600NPS 2–60 (DN50–1500)Wafer, lug, RF, RTJ
Forged CL800–2500NPS 1/4–2RF, RTJ, SW, THD, BW
DIN / EN — PN rated
DIN Swing PN10–40DN50–600 (2"–24")Flanged (EN 1092-1)
DIN Dual plate PN10–40DN50–600 (2"–24")Wafer, lug

Full scope, special-class items and non-standard sizes are quoted against specific enquiries.

Specification
Pressure class
CLASS150 – CLASS2500 / PN10 – PN40
Material options
WCB, LCB, WC6, WC9, CF8, CF8M, A105N, LF2
End connection
Flanged (RF, RTJ), wafer, lug, butt weld, socket weld
Typical application
Pump discharge and compressor outlets, pipeline sectioning, and backflow prevention in process, water and power plant lines.
Notes

Swing valves per BS 1868, dual-plate per API 594. Flanged dual-plate construction available for CL150–600. Top-of-class sizes quoted against specific enquiries.

Materials — trim — service
BODY & COVER
A216 WCB / A352 LCB / A217 WC6, WC9 / A351 CF8, CF8M / A105N, A350 LF2 (forged)
DISC & SEAT
13Cr / SS316 / Stellite overlay; metal-to-metal or resilient seated
FAQ
Which standard governs your CHECK VALVEs?

Swing type to BS 1868 and API 594, dual-plate to API 594, pipeline valves to API 6D, DIN / EN valves to EN 12334.

Swing or dual-plate — how do I choose?

Swing type suits full-bore lines and dirty service; dual-plate is shorter and lighter, better where space and weight are constrained. Both are available in the same pressure classes.

Can dual-plate valves be supplied flanged?

Yes, flanged dual-plate construction is available for CLASS150–600 in addition to the standard wafer and lug bodies.