GATE VALVEs for isolation duty in oil & gas, refining and water transmission lines, where a straight-through bore and low pressure drop matter more than throttling.
Cast steel with bolted or pressure-seal bonnet, and forged steel to API 602 for small bore high-pressure service.
Types & configurations- Cast steel, OS&Y, flexible wedge; bolted bonnet for CLASS150–600, pressure-seal bonnet for CLASS900 and above
- Forged steel to API 602, reduced or full bore; socket weld, threaded, butt weld or flanged ends
- Options: bellows seal, low-temperature extended bonnet, jacketed body, gear or actuator operation
| Pressure class / type | Size range | End connections |
|---|---|---|
| Cast steel CL150 | NPS 2–72 (DN50–1800) | RF, RTJ, BW |
| Cast steel CL300 | NPS 2–60 (DN50–1500) | RF, RTJ, BW |
| Cast steel CL600 | NPS 2–60 (DN50–1500) | RF, RTJ, BW |
| Cast steel CL900 | NPS 2–36 (DN50–900) | RF, RTJ, BW |
| Cast steel CL1500 | NPS 2–36 (DN50–900) | RF, RTJ, BW |
| Cast steel CL2500 | NPS 2–24 (DN50–600) | RF, RTJ, BW |
| Forged steel CL800–2500 | NPS 1/4–2 | RF, RTJ, SW, THD, BW |
| DIN / EN — PN rated | ||
| DIN PN10/16 | DN40–600 (1½"–24") | Flanged, BW |
| DIN PN25/40 | DN40–400 (1½"–16") | Flanged, BW |
| DIN PN63/100 | DN50–200 (2"–8") | Flanged, BW |
Full scope, special-class items and non-standard sizes are quoted against specific enquiries.
- Pressure class
- CLASS150 – CLASS2500 / PN10 – PN100
- Material options
- WCB, LCB, LCC, WC6, WC9, C5, CF8, CF8M, CF3M, duplex 2205, A105N, LF2
- End connection
- Flanged (RF, RTJ), butt weld, socket weld, threaded
- Typical application
- Isolation on wellheads and manifolds, refining and petrochemical units, power station feedwater and steam lines, and water transmission mains.
Pressure-seal bonnet standard for CL900 and above. DIN flange drilling to EN 1092-1. Top-of-class sizes quoted against specific enquiries.
- BODY & BONNET
- A216 WCB / A352 LCB, LCC / A217 WC6, WC9, C5 / A351 CF8, CF8M, CF3M / duplex 2205 / A105N, A350 LF2 (forged)
- TRIM
- F6a (13Cr) / SS304 / SS316 / Stellite-faced seats and wedges
Which standard governs your GATE VALVEs?
Cast steel valves are built to API 600 and ASME B16.34, forged valves to API 602, and DIN / EN valves to DIN 3352 and EN 1074. The standard is stated on the datasheet for each order.
Can you supply CLASS900 and above?
Yes. CLASS900 to CLASS2500 use a pressure-seal bonnet, with sizes tapering as the class rises — CLASS2500 stops at NPS 24.
What is the usual lead time?
Standard CLASS150–600 sizes are typically 25–35 days from order confirmation; high classes and special materials are quoted with a confirmed date.

