PLUG VALVEs for tough service where a ball valve would seize: refinery hot oil, bitumen, sour gas and lines carrying solids.
Inverted pressure-balanced lubricated type for low torque at high pressure, and sleeved soft-seated type for drip-tight quarter-turn shut-off.
Types & configurations- Inverted pressure-balanced lubricated type: balanced plug, low operating torque, grease sealed
- Sleeved (soft-seated) type with PTFE sleeve, quarter turn, drip-tight shut-off
| Pressure class / type | Size range | End connections |
|---|---|---|
| Inverted lubricated CL150–600 | NPS 1/2–24 (DN15–600) | RF, RTJ, BW |
| Sleeved CL150–300 | NPS 1/2–16 (DN15–400) | RF, THD |
| DIN / EN — PN rated | ||
| DIN PN10/16/25/40 | DN15–300 (½"–12") | Flanged, THD |
Full scope, special-class items and non-standard sizes are quoted against specific enquiries.
- Pressure class
- CLASS150 – CLASS600 / PN10 – PN40
- Material options
- WCB, LCB, WC6, WC9, CF8, CF8M, duplex 2205
- End connection
- Flanged (RF, RTJ), butt weld, threaded
- Typical application
- Refinery hot oil and bitumen lines, sour gas pipelines, instrumentation and sampling lines where solids or coking would damage a ball valve.
Inverted lubricated type widely used in hot oil, bitumen and sour gas service; seat weld overlay available.
- BODY
- WCB / LCB / WC6, WC9 / CF8, CF8M / duplex 2205
- PLUG & SEAT
- Ductile iron / SS with PTFE overlay or metal seated; grease injection fitting on lubricated type
Which standard governs your PLUG VALVEs?
API 599 for the ASME range, API 6D for pipeline valves and DIN 3202 for DIN / EN valves.
When should I use a plug valve instead of a ball valve?
When the medium is viscous, contains solids or tends to coke or polymerize. The straight-through plug port and metal seating tolerate conditions that seize a ball valve.
Is a grease injection system included?
The inverted lubricated type is supplied with a grease injection fitting as standard; sealant and injection schedule are stated in the operating manual.

